Omega Vehicle Security HHTFO Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para não Omega Vehicle Security HHTFO. Omega Vehicle Security HHTFO User's Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir

Resumo do Conteúdo

Página 1

1 HHTFO HHTFO

Página 2

Note: A small battery inside the HHTFOnot installed or when the AC power module is not used. This small battery has a nominal lifetime of 10 years.3

Página 3

4 HHTFO THERMOMETER 4.1 Display description The display is organized in 3 logical regions:• The top portion gives general information to the user

Página 4

The Up and Down keys can be used to:• When inside a menu, to select a parameter• When a parameter is highlighted, to change its value• The Up key ca

Página 5 - NTRODUCTION

13 Warning The flash card must be formatted before use. Furthermore, it is important to format it in FAT or FAT16 (not FAT32). Supported card si

Página 6 - 1.1 HHTFO

14 Take note that this format function will only perform a “quick format” procedure; if you want to do a full format, please use your PC to perform

Página 7 - 1.2 Calibration

15 The lock feature on your SD card is engaged. You need to unlock it before using the card. The HHTFO is running from the internal batteries. Ico

Página 8 - NPACKING

16 5 USING TEMPERATURE PROBES 5.1 Caution Each time you connect a temperature probe to the unit, the probe optical connector should be cleaned b

Página 9 - 3.1 Installing batteries

17 5.3 Warning The T1 probe is quite fragile and it must be handled carefully. Please note that any probe damages are not covered by the standard w

Página 10

18 6 SERIAL COMMUNICATION DESCRIPTION You can communicate with your thermometer via the standard RS-232 link. A description of the c

Página 11 - 4 HHTFO

19 HHTFO101 Description b Return enclosure temperature f[j] Set point adjustment to [j] h Help menu (this screen) i Get factory and status informat

Página 13 - 4.5.2 The Format sub-menu

20 “i” Returns general information regarding the instrument, as well as some parameters that have been programmed previously in the t

Página 14 - 4.7 Icon definition

21 6.4 Typical temperature reading sequence Once all parameters have been set, the following sequence should normally be followed to

Página 15 - 4.9 Probe connector

22 7 ERROR CODES The following error messages are displayed under certain error conditions: RS-232 Display Analog Out Description Err2 Err2 In

Página 16 - EMPERATURE

23 8 FOB100-SOFT SOFTWARE PACKAGE The FOB100-SOFT software package option allows using your thermometer system in a highly flexible ma

Página 17 - 5.3 Warning

24 You should normally see a window similar to this: In this example, we see that FOB100-SOFT has detected 2 thermometers: a FOB104

Página 18 - 6.2 RS-232 help menu

25 For each instrument, this configuration window gives some information about this particular information and allows you to set some parameters.

Página 19

26 Warning: Doing a temperature offset adjustment on a channel will alter its reading. In effect, it alters the thermometer own calibration

Página 20

27 • To start acquiring data, click the “START” button. Conversely, to stop the acquisition, click the “STOP” button. When subsequen

Página 21

28 When logging temperatures for a very long time, one needs to note that a standard Excel sheet is limited to 65535 lines. If this limit is reach

Página 22

29 Adjust the “Refresh Rate” (minimum is 0.2 sec) and Min / Max to suit your viewing needs. Note that the setting of curve colors and other

Página 23 - 8 FOB100-SOFT

3 TABLE OF CONTENTS 1 INTRODUCTION ...

Página 24

30 All dials share the same Min / Max reading setting. Refresh rate is always 1.0 sec. The size of this window will adapt to the number of displaye

Página 25

31 Before sending commands and receiving information from a specific module, it is necessary to select the instrument you want to interr

Página 26

32 8.5.1.3 Advance serial port setting This command allows the user to force the exclusion of one or more COM ports from being scanned when clickin

Página 29

4 Warning Permanent damage may be done to the thermometer if the power supply connections are not done correctly. Only use the supplied 6VDC power

Página 30 - 8.4 The FOB100 Console

5 1 INTRODUCTION Congratulations on the purchase of your HHTFO Series thermometer product! Your new temperature-sensing instrument will

Página 31 - 8.5 FOB100-SOFT functions

1.1 HHTFO product specifications Resolution Accuracy Calibrated Temperature Range Usable Temperature Range Number of channel Probe length Response t

Página 32 - 8.5.3 The Help Menu

Coupling, included with extension cable:FOBS-CAB-(*) Extension Cable Other options and configurations are also possible; contact Omega for more infor

Página 33

8 2 UNPACKING Before using your HHTFO thermometer, check the box content to be sure all items have been included. Your package should normally cont

Página 34

9 3 QUICK INTRODUCTION The best way to familiarize you with your new HHTFO thermometer is, of course, to use it! This chapter sho

Comentários a estes Manuais

Sem comentários