Omega Vehicle Security DP63000A-I Manual do Utilizador

LP0694Aomega.com e-mail: [email protected] latest product manuals:omegamanual.infoUser’s GuideShop online atDDPP6633000000AA-IIDDPP6633000000BB-IIDig

Entering Code 66 will overwrite all user settings withthe factory settings. The meter will display rESEt and thenreturn to CodE 00. Press the SEL butt

11The Security Code determines the programming mode and the accessibilityof programming parameters. This code can be used along with the ProgramMode L

Enter the reset action of the output. See figure for details.Auto = Automatic action; This action allows the output to automatically reset offat the t

136.5 MODULE 5 - SERIAL SETUP PARAMETERS (5-SSEr)The Serial Setup Parameters are only active when the optional RS232 or RS485 serial communications m

PROGRAMMING QUICK OVERVIEWPress and hold SEL buttonto enter Programming Mode.

WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for aperiod of 13 months from date of

Where Do I Find Everything I Need forProcess Measurement and Control?OMEGA…Of Course!Shop online at omega.comTEMPERATURE] Thermocouple, RTD & Ther

OMEGAnet®Online Serviceomega.comInternet [email protected] North America:U.S.A.: One Omega Drive, P.O. Box 4047ISO 9001 Certified Stamfor

3z FOUR SELECTABLE D.C. RANGES200 µA, 2 mA, 20 mA, 200 mAz MINIMUM AND MAXIMUM DISPLAY CAPTUREz LCD, REFLECTIVE OR RED/GREEN LED BACKLIGHTINGz 0.48&qu

1. DISPLAY: 5 digit LCD 0.48" (12.2 mm) high digitsDP63000A-I: Reflective LCD with full viewing angleDP63000B-I: Transmissive LCD with selectable

5ADDING OPTION CARDSThe DP63000 meters can be fitted with optional output cards and/or serialcommunications cards. The details for the plug-in cards c

WIRING OVERVIEWElectrical connections are made via screw-clamp terminals located on theback of the meter. All conductors should conform to the meter’s

74.3 INPUT WIRINGCAUTION: Power input common is NOT isolated from user inputcommon. In order to preserve the safety of the meter application, thepowe

85.0 REVIEWING THE FRONT BUTTONS AND DISPLAYPROGRAMMING MODE ENTRY (SEL BUTTON)It is recommended all programming changes be made off line, or beforein

96.1 MODULE 1 - SIGNAL INPUTPARAMETERS (1-INP)PARAMETER MENUª«0.02ArAN6EINPUT RANGESelect the input range that corresponds to the external signal. Th