omega.com e-mail: [email protected] latest product manuals:omegamanual.infoUser’s GuideLDN-PSShop online atsolartron6951
4.0: PSIM Schematic and Pin-outThe 5V power supply line from the network is isolated at the PSIM.All modules before the PSIM are powered from the netw
4.0: PSIM Schematic and Pin-out (continued)The PSIM will only supply power to the Orbit Modules that follow the PSIM. Some typical configurations are
5.1 Power SupplyThe mounting plate must notbe removed. The mountingplate is isolated and does notneed to be at earth potential.The power supply may be
PSIM-AC PSIM-DC PSIM-5V5.0: Dimensions and Mechanical Installation(continued)5.2 PSIMT-CON is permanently attached, module does notseparate.For more i
PSIM-AC PSIM-DC PSIM-5V6.0: SpecificationInputVoltage 85 to 264 Vac @ 47 Hz to 440 Hz.Current 0.8 AConnection via IEC320 connectorIsolation 2500 Vac i
6.0: Specification (continued)PSIM-AC PSIM-DC PSIM-5VInputLine Voltage 10 to 30 Vdc.Current 1.1 A @ 12 Vdc; 0.5 A @ 24 Vdc (nominal).Connection see no
6.0: Specification (continued)PSIM-AC PSIM-DC PSIM-5VLine Voltage see note 1 5.1 Vdc Nominal as supplied by user 5.25 Vdc MAXInput Current 1.8 A MAXCo
6.0: Specification (continued)PSIM-AC PSIM-DC PSIM-5VEnvironmentalOperational temperature 0 to 60 °CStorage temperature -20 to 60 °CHumidity 5% to 95%
Orbit Network Power Supply Requirements All Orbit Modules are designed to work from a supplyvoltage of 4.75V to 5.25 Vdc. When power is applied toa
7.0: Applications (continued)Voltage Drop EstimationThe following information is for guidance only when planning an installation. Voltage measurements
Servicing North America:USA: One Omega Drive, Box 4047ISO 9001 CertifiedStamford CT 06907-0047Tel: (203) 359-1660 FAX: (203) 359-7700e-mail:
PSIM-AC PSIM-DC PSIM-5V7.0: Applications (continued)Application 1: Basic Small Network Connection.• Power supplied to network from PC via network card
PSIM-AC PSIM-DC PSIM-5V7.0: Applications (continued)Application 2: Large network with modules close to computer and at a distance.• Power supplied fro
PSIM-AC PSIM-DC PSIM-5V7.0: Applications (continued)Volt drop V1is calculated in a similar way to the previous example except there is only a single c
PSIM-AC PSIM-DC PSIM-5V7.0: Applications (continued)Application 3: Large Network using PSIM-5V and RS232IM for network control.LDN-PS22M-3340/1206
PSIM-AC PSIM-DC PSIM-5VThe PSIM-5V is powering the whole Orbit Network. PSIM-5V volt drop is calculated using 12 as the total number ofOrbit modules;
PSIM-AC PSIM-DC PSIM-5V7.0: Applications (continued)Application 4: Modules located a long distance from computer.• Also for a computer that is not sui
7.0: Applications (continued)PSIM-AC PSIM-DC PSIM-5VApplication 5: Use with RS232 Interface Module (RS232IM).• Communication is via a RS232IM.• Power
M-3340/1206WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials andworkmanship for a period of 13 months f
Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course!Shop online at www.omega.comM-3340/1206TEMPERATUREThermocouple
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PSIM-AC PSIM-DC PSIM-5VIntroductionThe Power Supply Interface Module (PSIM) is part of theOrbit Measurement System. The PSIM provides localpower to th
This equipment is designed as safety Class 1 apparatusto comply with EN61010-1.Service SafetyThis equipment has been designed and tested to meetthe re
WARNING: Danger arising from loss ofground. During a fault condition and upon lossof protective ground (earth), all accessibleconducting parts - inclu
3.0: General InformationPSIM-AC PSIM-DC PSIM-5VLDN-PS6M-3340/12066951Power SupplyOUTPUTPSIM Variants6951Power SupplyOUTPUT6951Power SupplyOUTPUTPSIM-A
LDN-PS7M-3340/12063.0: General Information (continued)PSIM-AC PSIM-DC PSIM-5VPSIM General LayoutPSIM9111731 7 3 A 1 2 3 R 0 16951Power SupplyOUTPUT695
PSIM used in a small network configuration3.0: General Information (continued)PSIM-AC PSIM-DC PSIM-5VLDN-PS8M-3340/1206
Comentários a estes Manuais